The HD2010UC is an integrating portable sound level meter performing statistical analyses. The instrument has been designed combining price competitiveness and simplicity of use. Attention has
been paid to the possibility of updating the instrument, and the HD2010UC can be integrated, at any
time, with other options like “Advanced Data Logger” to extend its application scope. The firmware
can be upgraded directly by the user using the NoiseStudio program supplied with the instrument.
The HD2010UC conforms to IEC 61672-1 of 2002, IEC 60651 and IEC 60804 specifications with
class 2 or class 1 tolerances. The acoustic calibrator complies with IEC 60942 class 2 or class 1
specifications.
The HD2010UC is an integrating sound level meter and analyzer suitable for the following applications:
Assessment of the environmental noise level,
Occupational noise measurements at the workplace (according to ISO9612)
Measurement at the workplace,
Selection of personal protective equipment,
Production quality control,
Measurement of machine noise.
Using a HD2010UC you can measure the sound level by programming 3 parameters and freely selecting the frequency weightings and time constants. You can measure parameters such as Leq, SEL
and maximum and minimum sound levels with integration times from 1 second to 99 hours. If an
undesired sound event produces an over-load indication, or simply alter the result of an integration,
its contribution can be excluded using the versatile Back-Erase function.
The measured sound levels can be recorded in the large non-volatile memory in order to be transferred to a PC using the supplied NoiseStudio program.
For long term noise monitoring needs, it’s possible to increase the HD2010UC storing capacity with
the optional HD2010MC Secure Digital memory card reader. This device is supplied complete with
a 2GB memory card.
As a statistical analyzer, the HD2010UC samples the sound signal 8 times per second with Afrequency weighting and FAST constant, and it analyzes it statistically in 0.5 dB classes. It is possible to display up to 3 percentile levels between L1 and L99.
For further analysis, the LINE un-weighted output allows recording the sound signal either on tape
or directly on a PC equipped with a audio acquisition card.
The high speed of the USB interface combined with the flexibility of the RS232 interface allows
quick data transfers from the sound level meter to the PC mass storage, but can also control a modem or printer. For example, in case of lengthy recordings, you can activate the “Monitor” function.
This function allows to send the displayed data to a PC via the RS232 serial interface, to be directly
stored on the PC mass storage.
The sound level meter can be completely controlled by a PC through the multistandard serial interface (RS232 and USB) by using a special communication protocol. Through the RS232 interface,
the sound level meter can also be connected to a PC via modem.
Features:
Class 1 integrating sound level meter and spectral analyzer kit with datalogging functions and
4MB memory, Backlit LCD.
Real-time spectral analysis, class 1 according to IEC61260:1997, in octave bands from 32Hz to 8kHz.
Measurement range 30dB - 140dB, linear range 80dB.
High stability condenser ½” microphone, pre-polarized for
free field measurements
The kit DOES NOT INCLUDE the acoustic calibrator.
What's In The Box:
(1) HD2010UC sound level meter class
1,
(1) UC52/1 pre polarized condenser
microphone ½”
(1) DSAV windscreen,
(1) HD2010PNE2 preamplifier (or
HD2010PNE2W with opt.HD2010.OE)
(1) HD2110USB Connecting Cable/Device to Computer (M12 to USB)
(1) Noise Studio(*) basic software
downloadable from Delta OHM website
Bobot frekuensi: A, C, Z secara simultan (hanya C dan Z untuk Lpk)
Pembobotan waktu: CEPAT, LAMBAT, IMPULSE Simultan
Integrasi: Dari 1 detik hingga 99 jam dengan fungsi Hapus-Kembali
Analisis statistik:
Menampilkan hingga 3 tingkat persentil, antara L1 dan L99;
Distribusi probabilitas dan penghitungan tingkat persentil dari L1 hingga L99 ( opsi HD2010.O2 “Advanced data logger”):
- Parameter: LFp, Leq, Lpk , A, C atau Z - berbobot (hanya C atau Z untuk Lpk)
- Frekuensi pengambilan sampel: 8 sampel/detikKlasifikasi: Kelas 0,5 dB
Analisis peristiwa(Opsi HD2010.O2):
- Penghitungan 5 parameter peristiwa yang dapat diprogram secara bebas
- Penghitungan tingkat statistik dari L1 hingga L99
- Pemicu identifikasi peristiwa dengan ambang batas yang dapat diprogram dan filter durasi
- Pemicu manual
Logging data profil (Opsi HD2010.O2):
- Akuisisi profil, laporan, dan acara secara paralel
- 1 profil dengan pengambilan sampel 1/8 detik dan 3 profil dengan 2 sampel/detik, 5 profil parameter dalam mode Laporan dengan interval pengambilan sampel minimum 1 detik
Tampilan:
Layar LCD dengan lampu latar grafis 128 x 64
- 3 parameter dalam format numerik
- Profile LAFp dengan 8 sampel/detik (opsi HD2010.O2 “Advanced Data Logger”)
- Grafik distribusi probabilitas tingkat suara (opsi HD2010.O2 “Advanced Data Logger”)
- Grafik tingkat persentil dari L1 hingga L99 (opsi HD2010.O2 “Pencatat Data Lanjutan”)
Memori:
- Internal, sama dengan 8 MB untuk lebih dari 500 catatan. Jika opsi HD2010.O2 “Advanced Data Logger” diinstal, dengan 8 MB dimungkinkan untuk merekam 1 parameter PROFILE @1/8 s + 3 parameter SLM @ 1/2 s selama lebih dari 40 jam.
- Eksternal, melalui antarmuka kartu memori HD2010MC, menggunakan kartu SD hingga 2 GB
Masukan/Keluaran:
- Serial RS232 dan antarmuka USB
- Keluaran AC (LINE)
- Keluaran DC
Program PC:
Noise Studio (disediakan bersama instrumen): Antarmuka PC untuk pengunduhan data, penyiapan, dan manajemen instrumenModul perangkat lunak berlisensi untuk diaktifkan dengan kunci perangkat keras:
- NS1 - modul “Perlindungan pekerja”. Analisis kebisingan dan getaran di tempat kerja menurut UNI 9432 dan ISO 9612 danArahan 2003/10/CE dan 2002/44/CE.
- NS2A - Modul “polusi akustik”. Analisis kebisingan lingkungan. Analisis iklim kebisingan dan penilaian kebisingan darijalan, kereta api dan bandara sesuai dengan undang-undang. (memerlukan opsi HD2010.O2).
- NS4 - modul “Monitor”. Akuisisi waktu nyata berbasis PC. Pemantauan jarak jauh dan pengambilan data. Koneksi jarak jauh juga melalui Modem.Program ini memungkinkan pemrograman pengukuran dan kalibrasi dengan pengatur waktu dan melakukan perekaman audio acaratingkat pemicu yang dapat diprogram.
- NS5 - Modul ”Kebisingan Lingkungan”: analisis kebisingan lingkungan. Identifikasi sumber kebisingan dengan kondisi ambang batas danevaluasi impulsif. Beberapa fungsi memerlukan opsi HD2010.O2.
Kondisi pengoperasian: Suhu kerja -10…50 °C, 25…90% RH (tidak berkondensasi), 65…108 kPa. Tingkat perlindungan: IP64
Catu daya: 4,8 V / 2,1 A baterai isi ulang NiMH atau eksternal 5÷24 Vdc / 500 mA
Dimensi dan berat: 445 x 100 x 50 mm dilengkapi dengan preamplifier, 740 g (dengan baterai)
(1) Pengukur tingkat suara kelas 1 HD2010UC
(1) UC52/1 mikrofon pra-polarisasi bidang bebas
(1) kaca depan HDSAV
(1) Preamplifier HD2010PNE2 (atau HD2010PNE2W dengan pilihan HD2010.OE)
(1) Kabel HD2110USB (sebagai alternatif, berdasarkan permintaan, kabel serial HD2110RS untuk koneksi RS232),
(1) Baterai isi ulang
(1) Catu daya listrik stabil SWD10
(1) Perangkat lunak dasar Noise Studio dapat diunduh dari situs web Delta OHM